SPG-100
Product features
1. Using two grinding wheel heads, each moves radial and axial direction, simultaneous grinding of brim face, end face and
shaft of small spindle is achieved.
2. Fixed workcenterline structure enables easy setup change and simple application of loading and unloading device.
Mechanical specifications
You can scroll by flicking.| Capacity | Work Diameter | ～Φ10mm |
|---|---|---|
| GW (2 units) | Dimensions | Φ355×50×Φ177.8mm |
| Surface Speed | 2,000m/min | |
| Motor Capacity | 2.2kW | |
| Bearings | Oil Hydrostatic bearings |
|
| RW | Dimensions | Φ205×100×Φ101.6mm |
| RPM | 10～300r/min(60Hz) | |
| Motor Capacity | 0.5kW | |
| Bearings | Stationary Spindle(Hydrostatic Bearings) | |
| GW Dresser | controlled by GW slides | |
| RW Dresser | Traverse | AC servo motor drive |
| Infeed | Micro Handle(20µm/div) | |
| GW slide | Guideway | plain guideways(V-V) |
| Drive Method | AC servo motor | |
| Minimum Setting Unit | 0.1μm | |
| RW Slide | Guideway | plain guideways |
| Drive Method | AC servo motor | |
| Minimum Setting Unit | 0.1μm | |
| Weight | 4,000kg | |